If you’re looking for a way to enhance your Class 6 Maths, then look no further than the NCERT MCQ Questions for Class 6 Maths Chapter 14 Practical Geometry with Answers. MCQ Questions for Class 6 Maths with Answers is perfect for those who are in Class 6 Maths and want to get ahead of everyone else by mastering their subject skills as soon as possible! You can practice and test your subject knowledge by solving these Class 6 Maths Chapter 14 Practical Geometry Objective Questions.
Practical Geometry Class 6 MCQs Questions with Answers
Solving Class 6 Maths Practical Geometry MCQ with Answers can be of great help to students as they will be aware of all the concepts. These MCQ Questions on Practical Geometry Class 6 with answers pave for a quick revision, thereby helping you learn more about this subject.
Question 1.
Number of lines which can be drawn from one point.
(a) infinite
(b) 1
(c) 2
(d) None of these
Answer
Answer: (a) infinite
Question 2.
How many arcs are required to be drawn to construct an angle of 60°.
(a) one
(b) two
(c) three
(d) four
Answer
Answer: (b) two
Question 3.
Which geometrical instrument used to mark off equal lengths but not to measure them and draw arcs and circles?
(a) Compasses
(b) Set squares
(c) Divider
(d) Protractor
Answer
Answer: (a) Compasses
Question 4.
How do you draw a 90° angle?
(a) By drawing a perpendicular to a line from a point lying on it.
(b) By bisecting a 120° angle.
(c) By bisecting a 60° angle.
(d) By drawing multiples of 45° angle.
Answer
Answer: (a) By drawing a perpendicular to a line from a point lying on it.
Question 5.
What are minimum number of perpendiculars to be constructed to construct a square.
(a) one
(b) two
(c) three
(d) four
Answer
Answer: (b) two
Question 6.
If the diameter of a circle is 22 cm, then the radius of the circle is ____.
(a) 5.5 cm
(b) 11 cm
(c) 4.5 cm
(d) None of these
Answer
Answer: (b) 11 cm
Question 7.
How many arcs are to be drawn to construct an angle of 90°.
(a) one
(b) three
(c) five
(d) seven
Answer
Answer: (c) five
Question 8.
A _________ is a simple closed curve all of whose points are at the same distance from a fixed point.
(a) diameter
(b) radius
(c) triangle
(d) circle
Answer
Answer: (d) circle
Question 9.
The line segment forming a polygon is called _________________.
(a) angle
(b) side
(c) vertex
(d) None of these
Answer
Answer: (b) side
Question 10.
How many circles can be drawn through one given point.
(a) one
(b) two
(c) three
(d) Infinite number of circles
Answer
Answer: (d) Infinite number of circles
Question 11.
Number of circles passing through a given point are ____.
(a) 1
(b) 2
(c) 3
(d) infinite
Answer
Answer: (d) infinite
Question 12.
Which instrument is used to draw arcs and circles.
(a) compass
(b) protractor
(c) scale
(d) set square
Answer
Answer: (a) compass
Question 13.
Name the geometrical instrument having a semi-circular device graduated into 180 degree-parts.
(a) Divider
(b) Compasses
(c) Set squares
(d) Protractor
Answer
Answer: (d) Protractor
Question 14.
How many perpendicular bisectors are required to be constructed to divide a line segment in four parts.
(a) one
(b) two
(c) three
(d) four
Answer
Answer: (c) three
Question 15.
Into what type of parts is a figure divided by bisecting it?
(a) Unequal
(b) Equal
(c) Triangular
(d) Perpendicular
Answer
Answer: (b) Equal
Question 16.
Name the geometrical instrument having a pair of pointers.
(a) Set squares
(b) Divider
(c) Protractor
(d) Compasses
Answer
Answer: (b) Divider
Question 17.
How many circles can be drawn through two given points.
(a) one
(b) two
(c) three
(d) four
Answer
Answer: (a) one
Question 18.
A few lines in a plane have a point in common. What type of lines can they be?
(a) Intersecting lines
(b) Parallel lines
(c) Concurrent lines
(d) Either (a) or (c)
Answer
Answer: (d) Either (a) or (c)
Question 19.
If the radius of a circle is 7 cm, then the diameter of the circle is ____.
(a) 10 cm
(b) 14 cm
(c) 3.5 cm
(d) None of these
Answer
Answer: (b) 14 cm
Question 20.
If the diameter of a circle is 20 cm, then the radius of the circle is ____.
(a) 10 cm
(b) 5 cm
(c) 2.5 cm
(d) None of these
Answer
Answer: (a) 10 cm
Question 21.
Which instrument is used to draw angles.
(a) Scale
(b) Compass
(c) protractor
(d) Divider
Answer
Answer: (c) protractor
Question 22.
If the radius of a circle is 3 cm, then the diameter of the circle is ____.
(a) 1.5 cm
(b) 3 cm
(c) 6 cm
(d) None of these
Answer
Answer: (c) 6 cm
Question 23.
If the radius of a circle is 7.5 cm, then the diameter of the circle is ____.
(a) 15 cm
(b) 7.5 cm
(c) 12 cm
(d) None of these
Answer
Answer: (a) 15 cm
Question 24.
What is the equal distance of a point from the its centre called.
(a) Diameter
(b) Radius
(c) Chord
(d) None of these
Answer
Answer: (a) Diameter
Question 25.
What do you call two lines intersecting at a point?
(a) Perpendicular lines
(b) Parallel lines
(c) Bisectors lines
(d) Intersecting lines
Answer
Answer: (d) Intersecting lines
Question 26.
How many perpendicular bisectors are required to trisect a line segment.
(a) one
(b) two
(c) three
(d) None of these
Answer
Answer: (b) two
Question 27.
A maths teacher asked his students to draw a pair of parallel lines. Which instrument(s) are the students most likely to use?
(a) A ruler and a compass
(b) Two edges of a ruler
(c) A ruler and a setsquare
(d) Both (b) and (c)
Answer
Answer: (d) Both (b) and (c)
Question 28.
If the radius of a circle is 5 cm, then the diameter of the circle is ____.
(a) 10 cm
(b) 12 cm
(c) 2.5 cm
(d) None of these
Answer
Answer: (a) 10 cm
Question 29.
Which of the following is done to draw an angle of 150° using compasses and a ruler?
(a) Bisecting 120° and 180° angles.
(b) Bisecting 60° and 120° angles.
(c) Bisecting 0° and 60° angles.
(d) Bisecting a 360° angle.
Answer
Answer: (a) Bisecting 120° and 180° angles.
Question 30.
Which geometrical instrument used to compare lengths?
(a) Divider
(b) Protractor
(c) Compasses
(d) Set squares
Answer
Answer: (c) Compasses
Question 31.
For which of the following are the rails of a railway line an example?
(a) Parallel lines
(b) Intersecting lines
(c) Perpendicular lines
(d) Coplanar lines
Answer
Answer: (a) Parallel lines
Question 32.
Two lines are said to be perpendicular to each other when they meet at ____angle.
(a) 180°
(b) 90°
(c) 60°
(d) 360°
Answer
Answer: (b) 90°
Question 33.
Which geometrical instrument used to draw line segments and to measure their lengths?
(a) Divider
(b) Compasses
(c) Set squares
(d) Ruler
Answer
Answer: (d) Ruler
Question 34.
If the diameter of a circle is 14 cm, then the radius of the circle is ____.
(a) 7 cm
(b) 4.5 cm
(c) 3.5 cm
(d) None of these
Answer
Answer: (a) 7 cm
Question 35.
Name the geometrical instrument having two triangular pieces.
(a) Compasses
(b) Set squares
(c) Protractor
(d) Divider
Answer
Answer: (b) Set squares
Fill in the blanks:
1. Instrument used to draw circles is called …………….
Answer
Answer: compass
2. ……………. perpendicular bisectors are required to trisect a line segment.
Answer
Answer: two
3. Instrument used to measure an angle is known as …………..
Answer
Answer: protractor
4. A line segment is bounded by ………….. end points.
Answer
Answer: two
5. ………….. circles can be drawn through three non-collinear points
Answer
Answer: one
6. ……………………circles can be drawn from four scattered points
Answer
Answer: no circle
7. ……………. circles can be drawn from one given point
Answer
Answer: infinite
8. Instrument used to compare lengths is called ……………….
Answer
Answer: divider
9. Angle bisector of an angle divides the angle in ……………. equal parts.
Answer
Answer: two
Match the following:
1.
| (a) Measurement of length | (i) One circle can be drawn |
| (b) Measure an angle | (ii) Infinite no. of circles can be drawn. |
| (c) From one given point | (iii) Set squares |
| (d) From two given points | (iv) Scale |
| (e) From three collinear points | (v) protractor |
| (f) Two drawn perpendicular and | (vi) No cirlces can be drawn |
Answer
Answer:
| (a) Measurement of length | (iv) Scale |
| (b) Measure an angle | (v) protractor |
| (c) From one given point | (ii) Infinite no. of circles can be drawn. |
| (d) From two given points | (i) One circle can be drawn |
| (e) From three collinear points | (vi) No cirlces can be drawn |
| (f) Two drawn perpendicular and | (iii) Set squares |
Hope you found this information on NCERT MCQ Questions for Class 6 Maths Chapter 14 Practical Geometry with Answers useful. We are always here to help, so if there is any specific query or question with CBSE Class 6 Practical Geometry MCQs Multiple Choice Questions with Answers or any other topic please let us know in the comments below.